This is an update to the latest official firmware that I9515LUBU1ANJ1 Android 4.4.2 KitKat, if you want it is now available for
Galaxy S4 (value Edition) GT-I9515L. This is a firmware which was launched recently, and have available today in many countries of Brazil. And now you can download it UBU1ANJ1 Android 4.4.2 KitKat and flash or immediately install it manually on your Galaxy S4 I9515L (value Edition) must use the guidelines we have provided below. You should know that there are two official way there to update Samsung device to the latest
firmware-OTA & KIES. in this tutorial we have discussed all the update method in the later part of this article, continue lah learn step by step. Stock firmware update Android 4.4.2 KitKat I9515LUBU1ANJ1 is just regular updates that come with a variety of bug fixes and security enhancements will do. As always, we encourage you to update your device to the latest
firmware update available remains safe. Also a very good choice for the official firmware unroot your Galaxy S4 (value Edition) I9515L or unbrick it. How to root Android 4.4.2 firmware I9515LUBU1ANJ1 KitKat? lah continue reading and practice
Warning: This tutorial is only for Galaxy S4 (value Edition) GT-I9515L. and Do not ever do this guide on any other Android device. we are not responsible for damage, and all the risks borne by the owner, we only provide guidance
Pre Requisites:
Though official firmware restore all existing data but we recommend to back up your data first before proceeding to avoid any uncomfortable situation such as bootloop fix.
2. Make sure your device have at least 60% battery power.
3. You already have USB Driver Installed for Galaxy S4 (Value Edition) GT-I9515L in your PC. [
Download USB Drivers]
4. Make sure USB Debugging is enabled otherwise you won’t able to transfer file between PC and Galaxy S4 (Value Edition) GT-I9515L.
- First of all make sure you have stable internet connection (Wi-Fi or data network) on your device.
- Now, go to Android app drawer and then select Settings.
- Then locate About Device and tap on it.
- Next select Software update from About device screen.
- Then tap on Update option.
- You should see an update, press OK to download and install. (Remember, download using 3G or network data will incur additional charges to your phone bill!)
- Soon your device will reboot to complete the installation process.
If you see “The latest update have already been installed” massage while checking update then your device yet to receive an OTA update. Check back within few days or jump to next procedure.
- Make sure you have stable internet connection on your computer.
- Now download and install Samsung Kies on your computer.
- Turn on your device (if it off) and then connect it to computer with USB cable.
- Run Samsung Kies and wait for it to detect your device.
- You should see a New Firmware Upgrade is available at Samsung Kies home screen.
- Press the Firmware Upgrade button to proceed.
- Follow on screen instruction and soon you will see your device running upgrade and reboot automatically. Once done, you can disconnect your device from computer.
Again! If you see “This is the latest firmware” in Samsung Kies, then your device yet to receive the latest update on Kies. Its good time to go for manual update instruction that located below.
[Note: You can install any firmware listed below despite availability in other countries, except those which comes with carrier name.]
[Resumable and Torrent link will only be added when available from trusted source]
* I9515LUBU1ANJ1 Stock Firmware List Last Updated On 17-November-2014.
I9515LUBU1ANJ1 Android 4.4.2 KitKat Firmware Downloads
How To Install I9515LUBU1ANJ1 Android 4.4.2 KitKat On Galaxy S4 (Value Edition) GT-I9515L Manually
- Download Odin v3.09.
- Firmware Extract the zip file you downloaded earlier from the link above, you will get .tar.md5 files and some other files (optional).
- Odin Extract the zip file and you will get Odin3 v3.09.exe along with some other files.
- Turn off your Android device. Wait 5-6 seconds for vibration to confirm complete switch off.
- Now, put the Galaxy S4 (Value Edition) GT-I9515L in Download Mode by pressing and holding the Home button and the Volume Down buttons together while pressing the Power button. Warning screen will appear; press the Volume Up button to enter Download Mode.
- Now run Odin3 v3.09.exe (see Step 3) as the Administrator for Admin rights need to complete the current process (applies only Windows Vista and higher).
- Now connect your device to your PC using the USB cable. An "Added !!" massage will appear in the message box of Odin. If you do not get the same then you should try a different USB port (try the USB port located on the back of your desktop PC). If that too does not work then you have to reinstall the drivers. If you managed to see "Added !!" message in Odin then you are ready to go in the next step. You also have to look at the COM port number in the Yellow if you have successfully added your device.
- Click the AP button, and select the file .tar.md5 you get in Step 2. Old Odin users click on the PDA button instead
- In the Odin window, make sure only the Auto Reboot and F. Reset Time checkboxes are selected.
- Check all that we mentioned in Step 8 and Step 9 above. Now, Once satisfied press the START button to start the flashing process.
- After flashing is complete, your Galaxy S4 (Value Edition) GT-I9515L will restart and soon you will see the PASS message with a green background in the left-most box at the very top of Odin. Now you can unplug the USB cable to disconnect your device from the computer.
Congrats! You just updated your Galaxy S4 (Value Edition) GT-I9515L to Android 4.4.2 KitKat firmware. Go to Settings > About device to verify this firmware update.
Fix Boot Loop Issue On Galaxy S4 (Value Edition) GT-I9515L
If Galaxy S4 (Value Edition) GT-I9515L stuck at booting animation for more than 10 minutes after Step 11 then follow below instructions:
- Go to recovery mode. To do so, press and hold the Volume Up, Home and Power buttons together.
- Now perform Wipe data/Factory Reset and Wipe Cache Partition task before selecting reboot system now function. In recovery mode use Volume keys to navigate between options and Power key to select the option.
Please note, performing wiping task will erase your device internal memory data and not external SD card data.
That’s it! Let us know about your latest Android 4.4.2 KitKat experience.
0 comments:
Post a Comment